+86-0752-3699716

Maintenance Of Spherical Door Lock

Oct 18, 2024

Locks also require careful maintenance
1. During the process of opening and closing the door on a regular basis, it is best to hold the handle and rotate the lock tongue into the lock body. After closing the door, release it and do not forcefully hit the door, otherwise it will reduce its service life. Do not wipe the lock body and handle with a damp cloth, as some metal locks may rust as a result; Locks made of alloy materials will wear off the coating and lose their aesthetic effect.
2. Regularly maintain lubricant in the transmission parts of the lock body to ensure smooth transmission and extend its service life. It is recommended to check once every six months or a year, and also check whether the fastening screws are loose to ensure tightness.
3. During the use of the lock, regularly (every six months or a year) or when the key insertion and removal are not smooth, a small amount of graphite powder or pencil powder can be applied to the lock core groove to ensure smooth key insertion and removal. But it is important to avoid adding any other oil for lubrication to prevent grease from sticking to the pin spring, which may cause the lock head to fail to rotate and open.
4. Regularly check the fit gap between the lock body and the lock buckle plate, and whether the height fit between the lock tongue and the lock buckle plate hole is appropriate. The best fit gap between the door and the door frame is 1.5mm-2.5mm. If any changes are found, adjust the position of the hinge or locking plate on the door.

Send Inquiry