Metal stamping parts refer to parts formed into specified shapes using molds for steel/non-ferrous metal sheets at room temperature, with the required pressure provided by a press machine.
The definition of metal stamping parts: Metal stamping is sometimes also known as sheet metal forming, but with slight differences. The so-called sheet metal forming refers to the forming method of plastic processing using sheet metal, thin-walled tubes, thin materials, etc. as raw materials, collectively known as sheet metal forming. At this time, the deformation in the direction of thick plates is generally not given much consideration. Stamping technology can be roughly divided into two categories: separation process and forming process (further divided into bending, deep drawing, and forming). The separation process is to separate the stamped part from the blank along a certain contour line during the stamping process, and the quality of the separated section of the stamped part must also meet certain requirements; The forming process is to cause plastic deformation of the stamping blank without damage, and transform it into the required finished shape, while also meeting the requirements of dimensional tolerances and other aspects.
Folding hardware
Parts made from steel or some non-ferrous metals, with processing methods such as cold/hot stamping, extrusion, rolling, welding, cutting, etc., as well as other processes, are widely defined.
Folding stamping parts
The most commonly used in hardware processing refers to the use of molds for steel/non-ferrous metal plates at room temperature, which are formed into specified shapes by providing the required pressure for processing with a press machine.
Folding application
Widely used in various fields of our lives, including electronic devices, automotive parts, decorative materials, and so on. The stamping parts we usually refer to are cold stamped parts. For example, if you want to turn an iron plate into a fast food dish, you need to first design a set of molds. The working surface of the mold is the shape of the dish. Use the mold to press the iron plate, and it will become the dish you want. This is cold stamping, which directly uses the mold to stamp the hardware material.
