Replacement and daily maintenance of anti-theft door lock body

Replacement method of anti-theft door lock body:
Replacing the anti-theft door lock body is very simple. You only need a plum screwdriver. The specific steps are to remove the inner and outer handle panels. You can see two screws on the handle panel inside the house, one on the top and one on the bottom; then remove the inner and outer lock core caps. The screws are on the lock core cap inside the house, which are on the left and right sides of the key. Then remove the lock core positioning screws. The screws are on the side of the door, in the middle of the lock tongue, and at the same height as the lock core. The thickest one is. At this time, you can remove the lock core. Pay attention to the direction of the lock core for easy installation. Remove the four screws on the side of the door, which are above and below the lock tongue. This way, you can remove the lock body. Take out the lock core lock body (some lock cores require a key to take out the lock core). Finally, install the lock body you want to replace, hang the sky and earth lock, and then screw in the screws and do it as above.
Daily maintenance of anti-theft door lock body:
1. After opening the door, you should rotate the handle to retract the door lock tongue, and then release your hand after it is combined with the door frame to avoid serious collision of the door lock.
2. Frequently add a little lubricant to the rotating part of the lock body to reduce the friction of the lock body itself, thereby increasing the service life of the lock itself, and frequently check whether the lock pin is loose.
3. From time to time, add some items that can lubricate the lock core. Of course, you must not add lubricants or some oily substances. It is best to add some pencil lead powder, which can best lubricate the lock core.
4. Frequently check the matching gap between the lock body and the lock plate, as well as the height matching between the lock tongue and the lock plate and the gap between the door and the door frame, etc., and make appropriate adjustments when necessary.